Bearing Presser & Puller Facile

The Rally Bearing Presser offers an efficent and accurate solution for mounting bearings. With its easy-to-use design, you can achieve precise results without any hassle. Upgrade your bearing experience with this reliable and convenient tool.

Based on the former version, we improved the structure and make the whole tool more handy and portable.

This tool, made of 7075 aluminum alloy, is consist of two parts, the following picture shows the instruction for use:

Why do we need a good tool for bearing installation?
The installation of bearings into wheels is a precise job. If we press the bearing simply into the hub without making sure the position is 100% correct, it could create wobbling of the wheels, which not only leads to reduction of speed and instability on the ride, but also cause danger on wheels. 

Also, when it comes to metal core wheels, our Facial tool could easily deal with that - to push theose bearings into hard hubs is what we are good at!

Why do we need a good tool for bearing removing?
A strong removing by a T-Key could change the shape the reduce the precision of the inner circle of a bearing, which will affect the performance of the equipment.

How to use it to press the bearings?
Put your bearings, spacer and the wheels in order(as in the pic above) on the body 1; Start to rotate the body 2 along the thread to press over body 1. Stop when you couldn't rotate anymore- The installation is done. It works both on metal and plastic hubs. 

How to use it to remove the bearings?
Both parts has a bearing remover which works exactly the same. Insert the remover into your bearing; Apply slight lateral force to easily pry out the bearing. Thanks to the 7075 Alu alloy we use- its strength makes it remarkably straightforward.