Roces, Throne, Cult - Speedblade

These speed ice blades will fit skates that have a raised heel like the USD Classic Throne, Razors Cult and Roces M12 models if your take their soulplates off.

You will need to drill some new holes in the boot yourself find out below how.

There are two iceblades in one set.

Tutorial

-take the soulplate and frame off of the skate
-Get a drill with a 4mm head (the size of most screws)
-Put the iceblade on the shell and align them.
-Drill one of the holes.
-take the iceblade off the skate
-widen the hole in the shell with a 5mm drill (the size of most T-nuts)
-putt the T-nut in the new hole from the inside of the skate
-put the iceblade on the shell and screw it not to tight
-drill the other holes with a 4mm drill
-unscrew the single screw and take the iceblade off
-Drill out the all the holes with a 5mm drill
-put the rest of the T-nuts in the 5mm holes
-put the blade on the shell
-screw the bolts in the T-nuts

What size to get

The size is measured at the top of the blade like it is shown in one of the pictures.